- The RM450 has a milling depth of 150mm and is designed for milling in larger areas and depths that large contractors require.
- The tilt cylinder adds another dimension to the Schibeci RM450. This system allows you to cut to depths on either side of the machine (the same as the smaller RM milling machines) or set a cross slope angle upto 15% for rebates and angle cuts as required.
- The side shift allows for asphalt removal against kerbs and structures. This RM450 is ideal for high speed edge planing and shallow cuts.
- The RM450 is designed primarily for the Roadworks and Construction industry.
- It's compact design makes it perfect for minor rectification works.
- It's solid framework and fluid dynamic design makes the RM range stable in the cut.
- The two levelling rams on the RM give the operator a high degree of accuracy in cutting depth and cross slope control.
- All controllers for the RM are easily mounted onto any standard High Flow Skid Steer and utilise the machines existing hydraulics.
- Dust suppression system comes standard with the RM range.
- The RM range is an excellent solution for Councils, Contractors, Maintenance Teams and Hire Companies.

Performance Guidelines
Cuts Asphalt up to 150mm (6 inches) deep (per pass)
Excellent milling solution for asphalting contractors and councils 
For use in minor road rectification works
Suits High flow skid steers and excavators

Tungsten Carbide Cutting Teeth/Picks used
The RM450 is designed to be used with High Flow Skid Steers, Excavators and Backhoes.
RM 450
Hydraulic Flow Required
100+lpm (22+gpm)
Pressure Range
150 to 206 Bar (2200 to 3000PSI)
Can be suited to 350 Bar (5000PSI)
Hydraulic Horsepower Required
60 to 150KW (80 to 200HP)
Milling Width
450mm (18 inches)
Milling Depth
150mm (6 inches)
Number of Cutting Tools
Side Shift
Independent Level Control
Floating Turntable
Dust Suppression System
Tilt Control
Interchangeable wear strips on skid plates
Quick change tooling system
Long lasting carbide tooling system

Above: Watch the Schibeci RM450 Milling 120mm Solid Asphalt.

Schibeci Pty Ltd • Factory 4/23 Cooper Street, Campbellfield, Vic 3061, Australia • Phone: +61 (0)3 8339 0338 • Fax: +61 (0)3 8339 0617 • Email: